| Mengetik | tiang lurus, tiang tarik, putar tiang |
|---|---|
| Cocok untuk | distribusi listrik |
| Bentuk | conoid, multi-pyramidal, columniform, polygonal atau kerucut |
| Standar pengelasan | AWS D1.1 |
| Toleransi | / -2% |
| Ketebalan | 1mm hingga 30mm |
|---|---|
| Bentuk | Conoid, Multi-pyramidal, Columniform, polygonal atau kerucut |
| Kekuasaan | 10kv ~ 550kv |
| Cocok untuk | distribusi listrik |
| Kecepatan angin | 160 km / jam, 30 m / dtk |
| Tipe | AWS D1.1 33kv saluran transmisi tiang listrik tenaga galvanis |
|---|---|
| Cocok untuk | distribusi listrik |
| Perlakuan permukaan | Hot Dip Galvanized |
| Bahan | Dapat disesuaikan |
| Pengelasan | AWS D 1.1 |
| Bahan | P345, P235 |
|---|---|
| Beban Desain dalam Kg | 300~ 1000 Kg diterapkan pada 50cm dari tiang ke tiang |
| Torlance dimensi | +- 2% |
| Cocok untuk | distribusi listrik |
| Standar Pengelasan | AWSD 1.1 |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Surface Treatment | hot dip galvanized |
| Design Load in kg | 300~1000kg applicated to 50cm from the top pole |
| Wind speed | 160km/h, 30m/s |
| Suit for | electricity distribution |
| Power | 10kv~550kv |
|---|---|
| Design load in kg | 300~1000kg applicated to 50cm from the top |
| Thickness | 1mm to 30mm |
| Surface treatment | hot dip galvanization |
| Suit for | electricity distribution |
| Design load in kg | 300~1000kg applicated to 50cm from the top pole |
|---|---|
| Surface treatment | hot dip galvanization |
| Power | 10kv~550kv |
| Torlance of dimenstion | +- 2% |
| Suit for | electricity distribution |
| Suit for | electricity distribution |
|---|---|
| Type | straight pole, tensile pole, turn pole |
| Power | 10kv~550kv |
| Wind speed | 160km/h, 30m/s |
| tolerance | +/-2% |
| Features | high resistance of shock or vibration |
|---|---|
| Material | minimum yield strength is 345Mpa |
| Wind speed | 160km/h, 30m/s |
| Voltage | according to the customer's request |
| Warranty | 30 years |
| Power | 10kv~550kv |
|---|---|
| Wind speed | 160km/h, 30m/s |
| Thickness | 1mm to 30mm |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |