| Jenis | tiang lurus, tiang tarik, tiang belok |
|---|---|
| Cocok untuk | distribusi listrik |
| Bentuk | Conoid, Multi-pyramidal, Columniform, polygonal atau conical |
| Standar Pengelasan | AWS D1.1 |
| Toleransi | +/-2% |
| Toleransi dimensi | +- 2% |
|---|---|
| Tahan Angin | 3-500 km/jam |
| Bahan | GR50 GR65 S500 S355 |
| Ketinggian | 14 m |
| pengelasan | Pengelasan mengkonfirmasi dengan standar pengelasan internasional CWB |
| Style | hot dip galvanized |
|---|---|
| Wind speed | 160km/h,30m/s |
| Thickness | 1mm to 30mm |
| Tolance of dimenstion | +-2% |
| Shape | conoid ,multi-pyramidal,columniform,polygonal or conical |
| Bahan | S355JR |
|---|---|
| Aplikasi | distribusi listrik |
| Ketebalan | 2.5-10MM |
| Membentuk | Poligon |
| Galvanisasi | ASTM A123, rata-rata pelapisan tidak kurang dari 85um |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Suit for | electricity distribution |
| Shape | conoid, multi-pyramidal, columniform, polygonal or conical |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Suit for | electricity distribution |
| Shape | conoid, multi-pyramidal, columniform, polygonal or conical |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Suit For | electricity distribution |
| Shape | conoid, multi-pyramidal, columniform, polygonal or conical |
| Welding Standard | AWS D1.1 |
| Standard | ISO 9001 |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Suit for | electricity distribution |
| Shape | conoid, multi-pyramidal, columniform, |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |
| Mengetik | tiang lurus, tiang tarik, putar tiang |
|---|---|
| Cocok untuk | distribusi listrik |
| Bentuk | konoid, multi-piramidal, berbentuk kolom, poligonal atau kerucut |
| Standar pengelasan | AWS D1.1 |
| Toleransi | / -2% |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Suit for | electricity distribution |
| Shape | conoid, multi-pyramidal, columniform, polygonal or conical |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |