| Design load in kg | 300~1000kg applicated to 50cm from the top pole |
|---|---|
| Surface treatment | hot dip galvanization |
| Power | 10kv~550kv |
| Torlance of dimenstion | +- 2% |
| Suit for | electricity distribution |
| Design load in kg | 300~1000kg applicated to 50cm from the top pole |
|---|---|
| Surface treatment | hot dip galvanization |
| Power | 10kv~550kv |
| Torlance of dimenstion | +- 2% |
| Suit for | electricity distribution |
| Shape | conoid ,multi-pyramidal,columniform,polygonal or conical |
|---|---|
| Type | straight pole, tensile pole, turn pole |
| Power | 10kv~550kv |
| Tolance of dimenstion | +-2% |
| Surface treatment | hot dip galvanization |
| Jenis | 69KV 30kM Kutub Kutub Utara Galvanized Steel Poligon tahan air IP65 / IP54 |
|---|---|
| standar colar | Apa saja |
| Sertifikat | ISO 9001 |
| standar pengelasan | AWS D1.1 |
| Toleransi | / -2% |
| Design load in kg | 300~1000kg applicated to 50cm from the top pole |
|---|---|
| Surface treatment | hot dip galvanization |
| Power | 10kv~550kv |
| Torlance of dimenstion | +- 2% |
| Suit for | electricity distribution |
| Product Name | 18m Columniform Galvanized Steel Pole For Transmission Line , Utility Power Poles |
|---|---|
| Application | Power Transmission |
| Surface treatment | Hot dip galvanization |
| Welding standard | AWS D 1.1 |
| Galvanization standard | ASTM A 123 |
| Nama Produk | Transmisi dan distribusi listrik listrik tiang baja galvanis |
|---|---|
| Aplikasi | Transmisi daya |
| Perlakuan permukaan | Galvanisasi hot dip |
| Standar pengelasan | AWS D 1.1 |
| Standar galvanisasi | ASTM A 123 |
| Bahan | GR65 |
|---|---|
| Aplikasi | DISTRIBUSI LISTRIK |
| Ketebalan | 2,75 MM |
| Bentuk | POLIGON |
| GALVANISASI | ASTM A123 |
| Pengobatan permukaan | Hot Dip Galvanis |
|---|---|
| Jenis | tiang lurus, tiang tarik, tiang putar |
| ketebalan | 1mm hingga 30mm |
| Kekuatan | 10kv~550kv |
| Cocok untuk | distribusi listrik |
| Power | 10kv~550kv |
|---|---|
| Wind speed | 160km/h, 30m/s |
| Thickness | 1mm to 30mm |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |