| Toleransi dimensi | +- 2% |
|---|---|
| Hambatan angin | 3-500 km/jam |
| Bahan | S355 |
| Tinggi | 11 jt |
| pengelasan | Pengelasan mengkonfirmasi dengan standar pengelasan internasional CWB |
| Product Name | Galvanized Steel Poles |
|---|---|
| Welding standard | AWS D 1.1 |
| Material | Q345 |
| Torlance of the dimenstion | +- 2% |
| Warranty | 15 years |
| Bahan | menghasilkan kekuatan tidak kurang dari 235mpa |
|---|---|
| Jenis | Tipe Flange |
| Tinggi | 6m 7m 8m |
| Ketebalan | 4mm 3mm 2,75mm |
| Toleransi dimensi | +- 2% |
| Power | 10kv~550kv |
|---|---|
| Style | galvanization |
| Thickness | 1mm to 30mm |
| Type | straight pole, tensile pole, turn pole |
| Suit for | electricity distribution |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Suit for | electricity distribution |
| Shape | conoid, multi-pyramidal, columniform, polygonal or conical |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Suit for | electricity distribution |
| Shape | conoid, multi-pyramidal, columniform, polygonal or conical |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Suit for | electricity distribution |
| Shape | conoid, multi-pyramidal, columniform, polygonal or conical |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |
| Mengetik | tiang lurus, tiang tarik, putar tiang |
|---|---|
| Cocok untuk | distribusi listrik |
| Bentuk | conoid, multi-pyramidal, columniform, polygonal atau kerucut |
| Standar pengelasan | AWS D1.1 |
| Toleransi | / -2% |
| Type | straight pole, tensile pole, turn pole |
|---|---|
| Suit for | electricity distribution |
| Shape | conoid, multi-pyramidal, columniform, polygonal or conical |
| Welding standard | AWS D1.1 |
| tolerance | +/-2% |
| Mengetik | tiang lurus, tiang tarik, putar tiang |
|---|---|
| Cocok untuk | distribusi listrik |
| Bentuk | conoid, multi-pyramidal, columniform, polygonal atau kerucut |
| Standar pengelasan | AWS D1.1 |
| Toleransi | / -2% |