| Shape | conoid ,multi-pyramidal,columniform,polygonal or conical |
|---|---|
| Type | straight pole, tensile pole, turn pole |
| Power | 10kv~550kv |
| Tolance of dimenstion | +-2% |
| Surface treatment | hot dip galvanization |
| Shape | conoid ,multi-pyramidal,columniform,polygonal or conical |
|---|---|
| Type | straight pole, tensile pole, turn pole |
| Power | 10kv~550kv |
| Tolance of dimenstion | +-2% |
| Surface treatment | hot dip galvanization |
| Shape | conoid ,multi-pyramidal,columniform,polygonal or conical |
|---|---|
| Type | straight pole, tensile pole, turn pole |
| Power | 10kv~550kv |
| Tolance of dimenstion | +-2% |
| Surface treatment | hot dip galvanization |
| Power | 10kv~550kv |
|---|---|
| Design load in kg | 300~1000kg applicated to 50cm from the top |
| Thickness | 1mm to 30mm |
| Surface treatment | hot dip galvanization |
| Suit for | electricity distribution |
| Power | 10kv~550kv |
|---|---|
| Design load in kg | 300~1000kg applicated to 50cm from the top |
| Thickness | 1mm to 30mm |
| Surface treatment | hot dip galvanization |
| Suit for | electricity distribution |
| Type | Burial Type |
|---|---|
| Plant depth | 1.8m or 2.3m underground |
| Minimum yield strength | 355 mpa |
| Height | 8m to 27m |
| Appearance | Tubular,triangular,angular,lattice |
| Power | 10kv~550kv |
|---|---|
| Design load in kg | 300~1000kg applicated to 50cm from the top |
| Thickness | 1mm to 30mm |
| Surface treatment | hot dip galvanization |
| Suit for | electricity distribution |
| Bentuk | conoid, multi-pyramidal, columniform, polygonal atau kerucut |
|---|---|
| Mengetik | tiang lurus, tiang tarik, putar tiang |
| Kekuasaan | 10kv ~ 550kv |
| Toleransi dimenstion | -2% |
| Perlakuan permukaan | galvanisasi hot dip |
| Kekuasaan | 10kv ~ 550kv |
|---|---|
| Kecepatan angin | 160 km / jam, 30 m / dtk |
| Ketebalan | 1mm hingga 30mm |
| Standar pengelasan | AWS D1.1 |
| Toleransi | / -2% |
| Product Name | Galvanization Electric Power Pole |
|---|---|
| Application | Power Transmission |
| Dimension tolerance | +- 2% |
| Welding Standard | AWS D 1.1 |
| Galvanization Standard | ASTM A 123 |