Detail produk:
Syarat-syarat pembayaran & pengiriman:
|
Product Name: | 15m powder coated High Mast Pole with fixed ladder for park lighting | Surface treatment: | hot dip galvanization |
---|---|---|---|
Thickness: | 1mm to 30mm | Height: | from 20m to 50m |
Light extension: | up to 30000 ㎡ | Welding standard: | AWS D1.1 |
Cahaya Tinggi: | Park Light pole,Sports Light Poles |
Specification
Type |
Outdoor lighting pole/light pole/light column/street light pole |
Shape |
Conical/ Octagonal |
Material |
Usually Q345B/A572,minimum yield strength>=345n/mm2 |
Torlance of dimenstion |
-0.02 |
Design Load in Kg |
300~ 1000 Kg appliced to 50cm from the to pole |
Surface treatment |
Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required. |
Standard |
|
Length of per section |
Within 14m once forming without slip joint. |
Suit for |
Highway |
Option |
Height from 3m to 45m |
Production Process |
Raw material test → Cutting → bending →Welidng (longitudinal )→Dimension verify →Flange welding →Hole drilling →Calibration →Deburr→Galvanization or powder coating ,painting →Recalibration →Thread→Packages |
Descripition of material
1. Poles are made by the high-quality metal plants,which were molded into the multi-row cone-shaped vertical steel barwith hot galvanized anti-corrosion treatment
2. Light plate frame is made by high-quality stainless steel
3. Fastened bolts and nuts of stainless steel
Feature
Special designed for stadium to provide high-power, large-area lighting for facilities; Lighthouse is devided into fixed or lift, fixed poles set up an escalator inside for installation and maintenance purposes
Light source :400w-1000w sodium light
Application
City squares, stations, ports, highways, stadiums, flyovers and etc
Standard
Electric box protection level: IP23
Lamp protection level: IP54
Installation
1. high-pressure sodium lamp with external ballast and Triggers installed in light tray.
2. when replacing or repairing light and other electrical appliances, you should use special wrench to open it.
3. control box installed at the poles or the lower part of the poles
Specific explanation
1. please install according to requirements of the company
2. make sure that the light body touches the ground during installation.
Professional Direct Buried Q345 15m Metal Utility Poles Octagonal Cross Section Shape
Hot dip galvanisasi tiang listrik untuk over headline project
Conical 3.5mm thickness electric power pole 22m height with three sections for transmission
3mm Thickness NGCP Electrical Power Pole For Electricity Distribution
Transmission Line Project Electrical Power Pole 18m 10KN For Electricity Distribution
Power Line 11m 8KN Electrical Power Pole With Galvanizing Surface Treatment
Anticorrosive 14m 500Dan Steel Power Pole For Power Transmission Electric Line
Electricity Distribution 12m Tubular Steel Power Pole For Transmission Line Project
11.8m Height Spray Paint Galvanised Steel Poles For Transmission Equipment
12m Gr 65 Material Galvanized Steel Pole Round Electric Transmission Line Poles
12m S355 S500 Steel Power Pole ASTM A123 Galvanized For Street Lighting
Multi Sided Single Circuit Galvanized Steel Pole For Electrical Line 132kv