Kami Focous pada Kualitas Tinggi
Detail produk:
Syarat-syarat pembayaran & pengiriman:
|
| Product name: | Ground rod | Material: | Copper clad steel |
|---|---|---|---|
| Type: | Threaded or flat or pointed | Usage: | Underground |
| Copper layer thickness: | 0.254mm, 0.33mm, 0.5mm, 1.0mm | Application: | Lightning protection |
| Elongation: | 8%-15% | Straightness: | <1mm/m |
| Cahaya Tinggi: | copper bonded ground rod,copper clad ground rods |
||
1/2" 5/8" 3/4" copper clad steel ground rod with ground rod accessories
Specifications:
Copper Ground Rod using special electro forming technology, plating 99.9% pure copper uniformly
to the high quality low carbon steel core, through cold drawn process, to make tensile strength stronger, and maintaining toughness, with thick copper, well agglutination and so on. Have constant low
resistance and good plasticity, both with the same electrical conductivity of copper and also have the steel characteristics. Conventional copper layer thickness is 0.254mm, 0.33mm, 0.5mm, 1.0mm.
|
Model |
Diameter(mm) |
Copper Thickness(mm) |
Screw Thread |
Length Range(m) |
|
YH-A001 |
12.7 |
≥0.25 |
9/16 |
1—3 |
|
YH-A002 |
14.2 |
≥0.25 |
M16 |
1—3 |
|
YH-A003 |
16 |
≥0.25 |
M18 |
1—3 |
|
YH-A004 |
17 |
≥0.25 |
3/4 |
1—3 |
|
YH-A005 |
18 |
≥0.25 |
M20 |
1—3 |
|
YH-A006 |
20 |
≥0.25 |
M22 |
1—3 |
|
YH-A007 |
22 |
≥0.25 |
M24 |
1—3 |
Description:
Copper bonded ground rod is mainly used in the grounding device. Due to its good conductivity, corrosion resistance, tensile strength, low prices, etc.,
Copper bonded ground rod can be widely used, and have been recognized by the United States Institute of Electrical and Electronics Engineering (IEEE) standard, BS standard and International Electrotechnical Commission (IEC) standards.
In China, have been recognized in China Sinopec, China National Petroleum, the national electricity company, and gradually be widely used.
Packaging & Shipping:
Strong packing is available and free of charge ,which is suitable for loading, storage in most popular
condition .Custom packing will be charged reasonably to favor customer’s requirement .
Company introduction:
Estbilsed in 1991,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port .Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on.
We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132 KV transmission poels ,our products have been deliveried to more than 70 contries and areas ,including America,Australia ,Russia ,Genmery ,Span,Philippines ,Malaysia and so on.
Professional Direct Buried Q345 15m Metal Utility Poles Octagonal Cross Section Shape
Hot dip galvanisasi tiang listrik untuk over headline project
Conical 3.5mm thickness electric power pole 22m height with three sections for transmission
3mm Thickness NGCP Electrical Power Pole For Electricity Distribution
Transmission Line Project Electrical Power Pole 18m 10KN For Electricity Distribution
Power Line 11m 8KN Electrical Power Pole With Galvanizing Surface Treatment
Anticorrosive 14m 500Dan Steel Power Pole For Power Transmission Electric Line
Electricity Distribution 12m Tubular Steel Power Pole For Transmission Line Project
11.8m Height Spray Paint Galvanised Steel Poles For Transmission Equipment
12m Gr 65 Material Galvanized Steel Pole Round Electric Transmission Line Poles
12m S355 S500 Steel Power Pole ASTM A123 Galvanized For Street Lighting
Multi Sided Single Circuit Galvanized Steel Pole For Electrical Line 132kv
